Fiberlock Shockwave Mold Cleaner | Concentrate | 8310
Fiberlock's Shockwave is an EPA-registered disinfectant cleaner and mold killer. It is a quaternary ammonium chloride cleaner designed for use on various surfaces subject to microbial contamination. Shockwave is a concentrated formula that will disinfect hard, nonporous surfaces, and sanitize porous and semi-porous surfaces. Fiberlock Shockwave isn't just for your basement wall mold - it is an all-in-one product for treating wood structural members and carpets as part of a complete mold remediation project. ShockWave yields up to 64 gallons of usable product from every gallon of concentrate and has been tested to kill 80+ organisms including Aspergillus, Penecillium spinulosum, E. coli, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus, and many other pathogenic and environmental microbial organisms. It is not just a mold cleaner and a fungicide; it is also a hospital grade disinfectant.
Water damage restoration: This product is particularly suitable for use in water damage restoration situations to sanitize against odor causing bacteria on the following porous and semi-porous materials: carpets, carpet cushion, subfloors, drywall, trim and frame lumber, tackless strip and paneling. Using solutions recommended, saturate affected materials with enough product to remain wet for at least 10 minutes.
Sewer back-up and river flooding (black water): During mitigation procedures, dilute 2-4 ounces of the product per gallon of water allowing for the diluting effect of absorbed water within saturated materials. Remove gross filth or heavy soil along with non-salvageable materials. Saturate all affected areas with a sprayer using a coarse spray tip, before and after cleaning and extraction.
Disinfection: Add two ounces of ShockWave per gallon of water. Remove gross filth or heavy soil. For heavily soiled areas, a precleaning step is required. Apply solution with a cloth, mop, sponge, or hand pump trigger sprayer such that all surfaces remain wet for 10 minutes. Let air dry. Prepare a fresh solution for each use. ShockWave is effective in hard water up to 300 ppm hardness (calculated as CaCo3) and in the presence of organic soil (5% blood serum).
Fungicide: At 2 oz. per gallon, ShockWave is effective against the pathogenic fungi, Trichophyton mentagrophytes in 5% organic soil. Contact time - 10 minutes.
Virucidal: When used on inanimate, hard, non-porous, environmental surfaces at 2 ounces per gallon of water for a 10 minute contact time (5% organic soil), except for Poliovirus type 1 (strain): which requires a 20 minute contact time (5% organic soil) and HIV-1 which requires only a 30 second contact time.
Cleaning and Deodorization: ShockWave deodorizes garbage storage areas, empty garbage bins and cans, toilet bowls and any other odor-causing areas. Mix 2 ounces per gallon of water and apply solution to surfaces. Be sure to thoroughly wet surfaces, allow to air dry. ShockWave concentrate is designed to be diluted two ounces per gallon of water*, yielding 64 gallons of usable product per gallon of concentrate, making it an economical solution for your cleaning, disinfecting, and sanitizing needs.
• Effective in 98% soil load
• Over 130 organism kill claims
• Effective in 791 ppm hard water
• Approved for use against H5N1 Avian Flu
• Registered for sewage/black water remediation
• Sanitizes porous and disinfects non-porous materials
• EPA Reg. No.: 73884-1
• Product No.: 8310
• Available in 10 oz size concentrate and 1 gallon concentrate
• Product Data Sheet
• MSDS Sheet