logo image separator
Norkan Industrial Services Store
logo image separator
Original Color Chips
logo image separator
Negative Air Machine Superstore
logo image separator
Discount Visqueen
logo image separator
Epoxy Superstore
logo image separator

LEAD ENCAPSULANTS

L-B-C Lead Barrier Compound / Encapsulant 5801

L-B-C Lead Barrier Compound / Encapsulant 5801

2 Gallon Pail & 5 Gallon Pail

FEATURES:
• L-B-C is a high-solids, elastomeric-thermoplastic, water-based copolymer that meets or exceeds all projected federal, state and local standards for lead-based paint encapsulants. Blended specifically to form a durable and flexible encapsulant barrier between lead-based pain and the environment, L-B-C has been independently tested to the ASTM E-1795 requirements for Category III (Type III - Interior/Exterior) encapsulants. E-1795 is the principle performance standard required, adopted and/or incorporated by reference into lead paint abatement rules and regulations at the federal, state and local levels. L-B-C has been certified by Massachusetts (No. DL-12362), authorized by the states of Connecticut, Ohio, New York, Maryland, Minnesota, and Colorado. L-B-C is accepted for use in all 50 states. L-B-C has also been classified by Underwriters Laboratories (UL®). L-B-C is environmentally friendly and complies with all federal and state VOC requirements.

L-B-C contains Bitrex®, a bitter tasting, non toxic, anti-ingestant to discourage oral contact with lead paint. The required minimum 7 mil dry film thickness of L-B-C offers unparalleled interior and exterior coverage and economics. In addition, the lower film thickness reduces stress on the existing paint system and maintains architectural detail.

L-B-C can be successfully applied to the proper thickness in one application with most major brands or airless spray equipment. L-B-C can also be applied by brush or roller. L-B-C Type III can be used for application with surface temperatures as low as 38 °F.

Percent Solids: 62 ±2% by weight Volatile Principally water
Average Particle Size: 0.2 microns
Weight: at 78°F 11.5 ±0.3 lbs/gal
Viscosity: at 78°F 105 - 130 KU
Flash Point: Noncombustible (Water-based)
Minimum Shelf Life: at 78°F 36 months
Finish: Eggshell 60° spec. gloss: 4 ±1 85° spec. gloss: 3 ±1
Drying time: at 78°F To touch: 1-2 hours Additional coats/topcoat: 8-16 hours Full cure: 30 days

VIEW IN OUR STORE