Sika Armatec 110 EpoCem Bonding Agent, 3.5gal

  • Model: SIK91146
  • Shipping Weight: 65lbs
  • Manufactured by: Sika

Sika Armatec 110 EpoCem

Sika Armatec 110 EpoCem is a 3-component, solvent-free, moisture-tolerant, epoxy-modified, cementitious product specifically formulated as a bonding agent and anti-corrosion coating...

Price :
$299.00$178.9940% off

Sika Armatec 110 EpoCem

Sika Armatec 110 EpoCem is a 3-component, solvent-free, moisture-tolerant, epoxy-modified, cementitious product specifically formulated as a bonding agent and anti-corrosion coating.

Where to Use

  • As an anti-corrosion coating for reinforcing steel in concrete restoration.
  • As added protection to reinforcing steel in areas of thin concrete cover.
  • As a bonding agent for repairs to concrete and steel.
  • As a bonding agent for placing fresh, plastic concrete to existing hardened concrete.

Advantages

  • Excellent adhesion to concrete and steel.
  • Acts as an effective barrier against penetration of water and chlorides.
  • Long open time - up to 16 hours.
  • Not a vapor barrier.
  • Can be used exterior on-grade.
  • Contains corrosion inhibitors.
  • Excellent bonding bridge for cement or epoxy based repair mortars.
  • High strength, unaffected by moisture when cured.
  • Spray, brush or roller application.
  • Non-flammable, solvent free.

Coverage Bonding agent: minimum (theoretical) on smooth, even substrate 80 ft.2/gal. (=20 mils thickness). Coverage will vary depending on substrate profile and porosity.

Reinforcement Protection: 40 ft./gal. (=20 mils thickness) (2 coat application).

Packaging 3.5 gal. unit. (47.6 fl. oz. Comp. A + 122.1 fl. oz. Comp. B + 46.82 lb. Comp. C) Comp. A + B in carton, Comp. C in multi-wall bag.