Lag-Kote is a 100% acrylic, high-solids encasement/encapsulation coating, specifically formulated for application over a variety of asbestos containing materials. Tested and EPA accepted at Battelle Laboratories of Columbus, Ohio, under EPA Contract #68-03-2552-T2005, Lag-Kote was found to be an acceptable encapsulant. Lag-Kote was designed to encase asbestos-containing spray-on fireproofing, transite, and thermal insulation. Lag-Kote's viscous formulation minimizes dripping, clean-up and product waste. Lag-Kote provides a smooth, washable, aesthetically superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal, ferrous metal, masonry or other sound surfaces. UV inhibitors make Lag-Kote suitable for encasement of exterior asbestos containing materials including transite. Lag-Kote is water-base and non-toxic.
Product No.: 6420 white
Lag-Kote is a 100% acrylic, high solids encasement/encapsulation coating specifically formulated for application over a variety of asbestos containing materials (ACM). Lag-Kote is an EPA accepted coating for the encasement/encapsulation of ACM. It was tested at Battelle Columbus Laboratories of Columbus, Ohio, under EPA Contract
# 08-03-2552-T2005, and found to be acceptable as an encapsulant.
Designed to encase spray-on fireproofing, asbestos-containing plasters and paints, transite, and asbestos-containing thermal insulation, Lag-Kote’s viscous formulation minimizes dripping, clean-up and product waste. Lag-Kote provides a smooth, washable, aesthetically-superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal,
wood, masonry or other sound surfaces. UV inhibitors make Lag-Kote suitable for encasement of exterior asbestos containing materials. Lag-Kote yields an opaque, bright white finish, or can be factory tinted to meet specific color requirements. Lag-Kote is water-based and non-toxic.
PROPERTIES
• Solids by Weight: 48 +/-2%
• Volatile: Water
• Average particle size: 0.2 microns
• Viscosity @ 77°F: 120-130 Krebs Units
• Weight per gallon @ 77°F: 11.7 lbs.
• Film Hardness: Excellent
• Film Flexibility: Excellent
• Impact Resistance: Excellent
• Water resistance of dry film: Excellent
• Bond Strength to concrete/steel: Excellent
• Coverage:
Brush: 125-175 sq.ft./gal. (5 dry mils)
Airless Spray: 600 sq.ft./gal. (1 dry mil)
• Fire Rating ASTM E84-81a: Class “A”
(Southwest Research Institute)
Flame Spread: 5
Fuel Contribution: 0
Smoke Density: 0
• Dry Time 1 - 2 hours
• Shelf Life: @ 77°F, 36 months minimum, (in
original factory sealed containers)
• Odor: Applied indoors, virtually odorless
• Finish: Slight gloss
• Color: Bright White
• Packaged: 5 gallon pails and 2 gallon pails
Lag Kote II Encapsulant Coating 