Call: 1-800-227-8479
Abatement Supplies, Concrete Restoration, High performance Coatings & Safety Equipment



m menu image  m home m cart

Fiberlock Lag Kote II Encapsulant Coating (5-Gal)

$179.70

Add to Cart:



Details

  • Model: 64205
  • Shipping Weight: 45lbs
  • Manufactured by: Fiberlock

Description

Fiberlock LAG KOTE II Encapsulant Coating (5-Gal)


Lag-Kote II is a 100% acrylic, high-solids encasement/encapsulation coating, specifically formulated for application over a variety of asbestos containing materials. Tested and EPA accepted at Battelle Laboratories of Columbus, Ohio, under EPA Contract #68-03-2552-T2005, Lag-Kote was found to be an acceptable encapsulant. Lag-Kote was designed to encase asbestos-containing spray-on fireproofing, transite, and thermal insulation. Lag-Kote's viscous formulation minimizes dripping, clean-up and product waste. Lag-Kote provides a smooth, washable, aesthetically superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal, ferrous metal, masonry or other sound surfaces. UV inhibitors make Lag-Kote suitable for encasement of exterior asbestos containing materials including transite. Lag-Kote is water-base and non-toxic.


DESCRIPTION


Product No.: 6420 white


Lag-Kote is a 100% acrylic, high solids encasement/encapsulation coating specifically formulated for application over a variety of asbestos containing materials (ACM). Lag-Kote is an EPA accepted coating for the encasement/encapsulation of ACM. It was tested at Battelle Columbus Laboratories of Columbus, Ohio, under EPA Contract


# 08-03-2552-T2005, and found to be acceptable as an encapsulant.


Designed to encase spray-on fireproofing, asbestos-containing plasters and paints, transite, and asbestos-containing thermal insulation, Lag-Kote’s viscous formulation minimizes dripping, clean-up and product waste. Lag-Kote provides a smooth, washable, aesthetically-superior finish that will provide years of lasting protection. Lag-Kote has excellent resistance to alkalis and can be applied directly over galvanized metal,


wood, masonry or other sound surfaces. UV inhibitors make Lag-Kote suitable for encasement of exterior asbestos containing materials. Lag-Kote yields an opaque, bright white finish, or can be factory tinted to meet specific color requirements. Lag-Kote is water-based and non-toxic.


PROPERTIES

• Solids by Weight: 48 +/-2%

• Volatile: Water

• Average particle size: 0.2 microns

• Viscosity @ 77°F: 120-130 Krebs Units

• Weight per gallon @ 77°F: 11.7 lbs.

• Film Hardness: Excellent

• Film Flexibility: Excellent

• Impact Resistance: Excellent

• Water resistance of dry film: Excellent

• Bond Strength to concrete/steel: Excellent

• Coverage:

Brush: 125-175 sq.ft./gal. (5 dry mils)

Airless Spray: 600 sq.ft./gal. (1 dry mil)

• Fire Rating ASTM E84-81a: Class “A”

(Southwest Research Institute)

Flame Spread: 5

Fuel Contribution: 0

Smoke Density: 0

• Dry Time 1 - 2 hours

• Shelf Life: @ 77°F, 36 months minimum, (in

original factory sealed containers)

• Odor: Applied indoors, virtually odorless

• Finish: Slight gloss

• Color: Bright White

• Packaged: 5 gallon pail

Product Data Sheet
Material Safety Data Sheet (MSDS)




This product was added to our catalog on Wednesday 12 December, 2007.




Copyright © 2017 Norkan Store. Powered by Zen Cart.